Shop

Description Read Before Ordering Description HPE 5130 48G PoE+ 4SFP+ 1-slot HI Switch – Switch – managed – 48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ – rack-mountable – PoE+ The HPE FlexNetwork 5130 HI Switch Series delivers scalability and resiliency at the access layer of medium and large enterprise campus networks. This FlexNetwork switch supports enterprise class QoS and security, HPE Intelligent Resilient Framework (IRF) stacking, static Layer 3 routing and RIP, dual redundant power supplies, fixed and modular 10GbE uplinks ports, PoE+, ACLs, IPv6 and delivers energy savings with Energy Efficient Ethernet. The 5130 HI Switch Series can be managed with HPE Intelligent Management Center (IMC) Software for a single view of your entire network. Main Specifications Product Description HPE 5130 48G PoE+ 4SFP+ 1-slot HI Switch – switch – 48 ports – managed – rack-mountable Device Type Switch – 48 ports – managed – stackable Enclosure Type Rack-mountable 1U Subtype Gigabit Ethernet Ports 48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ Power Over Ethernet (PoE) PoE+ PoE Budget 1440 W Performance Throughput : up to 190.5 Mpps Routing/switching capacity : 256 Gbps Capacity Simultaneous VLANs : 4094 IPv4 routing table entries : 32768 IPv6 routing table entries : 16384 Jumbo Frame Support 9KB Routing Protocol RIP-1, RIP-2, IGMPv2, IGMP, PIM-SM, IGMPv3, MSDP, MLD Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS, TFTP, SSH-2, CLI, SCP Features Flow control, DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, Weighted Round Robin (WRR) queuing, IPv6 support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Committed Access Rate (CAR), DHCP server, Device Link Detection Protocol (DLDP) support, Equal-Cost Multipath (ECMP), STP Root Guard, IPv4 support, LLDP support, Smart Link Pass-Through, dynamic ARP protection, DHCP protection, port isolation, non blocking ports, Strict Priority (SP), Generic Attribute Registration Protocol (GARP), Intelligent Resilient Framework Technology (IRF), OpenFlow support, IP source guard Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3az Power AC 120/230 V ( 50/60 Hz ) Power Redundancy Optional Dimensions (WxDxH) 17.3 in x 18.1 in x 1.7 in Weight 27.56 lbs Extended Specifications General Device Type Switch – 48 ports – managed – stackable Enclosure Type Rack-mountable – 1U Subtype Gigabit Ethernet Ports 48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ Power Over Ethernet (PoE) PoE+ PoE Budget 1440 W Performance Throughput : up to 190.5 Mpps Routing/switching capacity : 256 Gbps Capacity Simultaneous VLANs : 4094 IPv4 routing table entries : 32768 IPv6 routing table entries : 16384 Jumbo Frame Support 9KB Routing Protocol RIP-1, RIP-2, IGMPv2, IGMP, PIM-SM, IGMPv3, MSDP, MLD Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS, TFTP, SSH-2, CLI, SCP Encryption Algorithm SSL Authentication Method Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2), HWTACACS Features Flow control, DHCP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, Weighted Round Robin (WRR) queuing, IPv6 support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Committed Access Rate (CAR), DHCP server, Device Link Detection Protocol (DLDP) support, Equal-Cost Multipath (ECMP), STP Root Guard, IPv4 support, LLDP support, Smart Link Pass-Through, dynamic ARP protection, DHCP protection, port isolation, non blocking ports, Strict Priority (SP), Generic Attribute Registration Protocol (GARP), Intelligent Resilient Framework Technology (IRF), OpenFlow support, IP source guard Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3az RAM 2 GB – SDRAM Flash Memory 512 MB Expansion / Connectivity Interfaces 48 x 1000Base-T – RJ-45 4 x 10Gbit LAN – SFP+ 1 x serial (console) 1 x USB 2.0 1 x management (LAN) – RJ-45 Expansion Slots 1 (total) / 1 (free) x expansion slot Installed Modules Qty (Max) 1 (installed) / 1 (max) Power Power Device Internal power supply Installed Qty 0 (installed) / 2 (max) Power Redundancy Optional Power Redundancy Scheme 1+1 (with optional power supply) Voltage Required AC 120/230 V ( 50/60 Hz ) Power Consumption Operational 670 Watt Miscellaneous Compliant Standards VCCI, EN 61000-3-2, AS/NZS 60950-1, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, EN 60825-1, GB 4943, CAN/CSA C22.2 No. 60950-1, ANSI C63.4-2009, EN 60825-2, EN 61000-3-3:2008, EN 61000-4-4:2012, EN 61000-4-5:2006, EN 61000-4-6:2009, EN 61000-4-11:2004, EN 300 386 V1.6.1, VCCI V-3/2013.04 Class A, CISPR 24:2010, EN 55022:2010 Class A, FCC CFR47 Part 15 A Dimensions & Weight Width 17.3 in Depth 18.1 in Height 1.7 in Weight 27.56 lbs Environmental Parameters Min Operating Temperature 23 F Max Operating Temperature 113 F Humidity Range Operating 10 – 90% (non-condensing) Min Storage Temperature -40 F Max Storage Temperature 158 F Humidity Range Storage 5 – 95% (non-condensing) View All Close Read Before Orderings Product images are for illustrative purposes only and the final product delivered may vary from the one shown above. In some cases, a product sold may arrive in different packaging than its original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item. At checkout, the shipping cost is a general estimate which is subject to change depending on size/weight/quantity of ordered goods. Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality. Refurbished printers may not have full ink cartridges or laser toners. Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees. Please note if you are concerned about any of the above conditions or have any question at all, we highly recommend that you contact us on [email protected] or call 425-615-6227 before placing an order. View All Close